PR-111 · Weatherproof

Neutral Weatherproof Silicone Sealant

General-purpose neutral cure weatherproof sealant for exterior joints. Balanced performance with high extrusion rate for fast, labour-saving application.

Product Standard	JC/T 485-2007
Cure System	Neutral Cure
Packaging	300mL cartridge, 590mL sausage
Shelf Life	12 months from production date
Transport	Non-hazardous goods
Storage	Dry, ventilated, cool place

Request Quotation for PR-111

Technical Data

Extrusion rate	212 mL/min (min. 50)
Tack-free time	1.1 h (max. 72)
Sag resistance (vertical)	0 mm (max. 2)

Sag resistance (horizontal)	0 mm (max. 2)
Tensile adhesion (Type M)	0.41 MPa
Tensile adhesion (Type G)	0.40 MPa

Typical values obtained under laboratory conditions (23°C / 50% RH) and not intended for specification purposes. Tested to JC/T 485-2007 — Report No. 2025ME159. Download the full test report on request.

Product Characteristics

Neutral cure — non-corrosive to aluminium, concrete and coated glass
High extrusion rate of 212 mL/min for fast gunning
Weatherproof for exterior window, door and facade joints
Excellent adhesion to common building substrates
Good ageing resistance for long service life
Transport as non-hazardous goods

Applications

Exterior window and door perimeter sealing
General construction and expansion joints
Metal and glass facade weatherproofing
Concrete and masonry joint sealing

Limitations

Not for structural bonding
Do not apply on damp or frosty surfaces
Not for continuous water immersion
Apply at 4°C to 40°C

Application Scope

Where PR-111 Is Used

PVC Window & Door Profiles

Neutral-cure silicone sealant for PVC and uPVC window and door profiles — bonds to plasticised frames, aluminium and masonry without releasing acetic acid.

Precast Concrete Panels

Neutral cure sealant for precast concrete panel joints — non-corrosive to concrete and mortar, no acid etching or staining.

Window & Door Sealing

Neutral cure weatherproof silicone for window and door frame joints, plus a fast-cure grade for factory fabrication lines.

Ordering Information

MOQ, Lead Time & Private Label — PR-111

MOQ OEM & private label from 1,000 pcs per model

Trial Order Mixed-model trial orders from 3,000 pcs total; stock items from 500 pcs

Lead Time Typically 15–25 days after artwork and sample approval

Packaging 300 mL cartridge or 590 mL foil sausage pack

Shelf Life 12 months from production date

Private Label Custom cartridge artwork and colour matching supported

Not sure how many cartridges your project needs? Use the free joint width & coverage calculator →

Common Questions

FAQs — PR-111

What is PR-111 used for?

Exterior window and door perimeter sealing, general construction and expansion joints, metal and glass facade weatherproofing, and concrete and masonry joint sealing.

What is the difference between PR-111 and PR-666?

Both are neutral cure weatherproof sealants: PR-111 is qualified to JC/T 485-2007 and PR-666 to GB/T 14683-2017. PR-111 is the general-purpose grade with a high extrusion rate for fast, labour-saving application. PR-666 is the higher-specification all-weather grade with a 516 mL/min extrusion rate and 0.6 MPa modulus.

What standard does PR-111 meet?

JC/T 485-2007 (window and door elastic sealant, classification SR 3 MG AK). Test report 2025ME159 is available on request.

Can it be used for structural bonding?

No. It is a weatherseal product and should not be used where the sealant has to carry load. Use PR-999 for structural applications.

What is the MOQ and lead time?

Standard OEM and private label MOQ is 1,000 pcs per model, with mixed-model trial orders from 3,000 pcs total and stock items from 500 pcs. Typical lead time is 15–25 days after artwork and sample approval.